AVK RESILIENT SEATED GATE VALVE, PN16

Description

Key Features

• Cap top as standard.
• The ductile iron wedge, is fully vulcanized with EPDM rubber.
• O-ring stem seals are replaceable under pressure.
• Fully corrosion resistant construction.
• Blue fusion bonded epoxy coating, in accordance with WIS 4-52-01 – Class B.
• Body, bonnet and gland bolts sealed with hot melt
• Lifting bars.
• Patent pending.
• Internal holiday free coating.
• Options:

• ISO flange gland version for gearbox and actuator mounting (21/37 and 21/78).
• Clockwise to open (red stem cap insert), clock wise to close (white stem cap insert).
• The version available for salt-laden environments (21/58).
• Bypass valve available on DN350 & 400 sizes.
• Safety Note:
  • The valves now accommodate lifting bars for the safe handling of valves. These lifting bars are rated to the weight of the bare valve and stem cap (where fitted) only and should not be utilised if the valve is fitted with pipe, mechanical pipe joints, gearboxes, actuators or any other external fitment. AVK will not accept any responsibility for loss or damage if the lifting bars are not used in strict accordance with this guidance.

Information

The 21/35 is a resilient seat, wedge gate valve for isolation purposes suitable for use with water and neutral liquids (sewage) to a maximum temperature of up to +70°C.

Standards

• Designed according to BS EN 1074 -1 and 2, Designed according to BS5163/B
• Face to face according to EN 558 Table 2 Basic Series 3
• Standard flange drilling to EN1092 (ISO 7005-2), PN 16

Test/Approvals

• Hydraulic test according to EN 1074-1 and 2 / EN 12266.
• Approved according to WRAS
• Drinking Water Inspectorate Regulation 31 compliant